Agilent Technologies Turbo-V 250 Manual De Instrucciones página 216

17 Technical Information
Use
where: XX =indicates the rotational speed (56 KRPM for high speed,
or 37 KRPM for low speed).
I
X
Figure 9
where:
216/240
During acceleration of the pump or during any operating
condition, it is always possible to select the other parameters to
be displayed pressing the PUMP CURRENT or the CYCLE
NUMBER pushbuttons.
At any time, pressing the CURRENT pushbutton, the display
shows:
= 0 . 0 0
. .
I = is the DC current drawn by the pump range (0.00 to 9.99
Ampere)
P = is the DC power drawn by the pump (range 0 to 999 Watt)
KRPM = is the theoretical rotational speed of the pump as a
function of the controller output frequency (range 3 to 56 KRPM)
°C = is the temperature of the outer ring of the upper bearing
(range 00 to 99 °C)
Turbo-V 250 Controller User Manual / 87-900-856-01 (E)
A P
K R P M
= 0 W
X X ° C