Publicidad
Idiomas disponibles
Idiomas disponibles
4. Disconnect the turn signal lead
wire and then remove the wind-
screen assembly (C).
(Do the same operation for right
and left side)
5. Remove the STD turn signal
and STD plate.
6. Set the LED Turn signal 1 and
Bracket 3 to the windscreen
brace.
7. Fix the LED Turn signal 1, STD
plate which were removed in
step 5, Washer 5 and Nut 4 to
the windscreen brace.
8. Connect the Lead Wire 2 to
the LED Turn signal 1.
9. Bind the Lead Wire 2 with the
Clamp 9 as shown in the pic-
ture.
10.Connect the Lead Wire 2 to
the turn signal coupler of the
vehicle.
NOTICE
Right turn signal coupler
---> "black coupler"
Left turn signal coupler
---> "gray coupler"
(C)
STD plate
GENUINE SUZUKI ACCESSORIES
7/10
Publicidad
