Remote Commander Functions; Slide Show - Sony CSS-HD2 Manual De Instrucciones

Remote Commander
functions
The functions of the Remote Commander differ
depending on the camera you use.
For further information, refer to the operating
instructions supplied with the camera.
Slide show
You can play back a series of still images recorded
with your camera by only pressing the
Show) button on the Remote Commander.
1
Turn on the power of the camera by
pressing the (playback) button of
the camera or the POWER button on the
Remote Commander.

Press the (Slide Show) button on the
Remote Commander.
The Slide Show settings screen appears.
The Slide Show settings screen may not be

displayed on some models even if you press
the (Slide Show) button. The Slide Show
will start in the preset conditions. For further
details about the setting method, refer to
the operating instructions supplied with the
camera.

Use the control buttons on the Remote
Commander to change the settings of the
Slide Show.

Use the control buttons on the Remote
Commander to select [OK] and press the
center button or press the
Show) button on the Remote Commander.
1-GB
To cancel Slide Show
Press the
Commander again.
For further information, refer to the operating

instructions supplied with the camera.
Switching the view mode
You can change the index display by pressing the
VIEW MODE button on the Remote Commander.
Except for DSC-T75/T70/T2/W130/W125/W120/

W115/W110.
1
Turn on the power of the camera by

Press the VIEW MODE button on the

Use the control buttons on the Remote
When you press the V UP button and V DOWN

button on the Remote Commander, you can
perform the following functions in each view
(Slide
mode.
–
–
–
Filter by Faces
You can search the images recorded with various
faces by pressing the FACE button on the Remote
Commander.
Except for DSC-T75/T70/T2/W130/W125/W120/

W115/W110.
1
Turn on the power of the camera by

Press the FACE button on the Remote
(Slide
(Slide Show) button on the Remote
pressing the (playback) button of
the camera or the POWER button on the
Remote Commander.
Remote Commander.
The view mode screen appears.
Commander to select the desired view
mode and press the center button.
The images are displayed in index mode using
the view mode you just selected.
Date View mode:
Display the previous date and next date.
Folder mode:
Display the previous folder and next folder.
Favorites mode:
Display the previous page and next page.
pressing the (playback) button of
the camera or the POWER button on the
Remote Commander.
Commander.
The Search images menu appears.