Foreword; Information About The Manual; Notes On The Operating Instructions; Representation Of Safety Instructions - Kerbl MaxiSwing Instrucciones De Uso

(EN) Read and pay attention to these operating instructions before assembly and initial
commissioning! Keep these operating instructions for future reference!

1. Foreword

1.1 Information about the manual

We reserve the right to make changes due to further technical development compared to the data and illustrations mentioned in this manual.
Reprints, translations and reproductions in any form, including excerpts, require the written consent of the manufacturer.
Abbreviations, units, technical terms, special designations or industry-standard terminology used in this manual are explained in more detail in
the "Appendix" section.
This manual is part of the scope of delivery.
• It must be kept close at hand and remains with the unit even if it is sold.
• This manual is not subject to a revision service. The respective current status can be obtained from the specialist trader or directly from the
manufacturer.
• It has a modular structure and refers exclusively to the named product.
• These operating instructions describe the operation, use and maintenance of the unit.
The safety instructions are intended to prevent personal injury, damage to animals and the unit. All operators are required to read and observe
these safety instructions at all times. The manufacturer accepts no liability or warranty for damage and malfunctions resulting from non-observan-
ce of the operating instructions!

1.2 Notes on the operating instructions

Document No.: 27053
Version/revision: 1.0
Creation date: 23.04.2021
Last change: 23.04.2021
Language of the original operating instructions: German

1.3 Representation of safety instructions

1.3.1 Safety instructions in the operating instructions

Danger!
Imminent danger which leads to serious physical injury or death.
Caution!
Risk of physical injury to people and animals and material damage if used incorrectly!

Important!

Potentially harmful situation that could damage the product or an object nearby.
Note
This pictogram identifies information that contributes to a better understanding of the work processes.

1.3.2 Safety instructions on the control unit and the unit

Warning - electrical voltage!
Disconnect the mains plug!
Only open the control unit and carry out maintenance work on the entire machine when the mains plug is disconnected!
Follow the instructions!
Read the instructions before installing and starting work and/or operating the unit.
Keep your distance!
Do not enter the machine's swivel area until the mains plug has been disconnected.
36