General Specification; Safety Precautions - Baker Hughes Druck PV 411A Manual Del Usuario

5. General Specification

INFORMATION
compatible with stainless steel, anodized
aluminum, nitrile rubber, PTFE,
polypropylene, Delrin, acrylic and nylon.
Item Specification
Pneumatic Pressure 0 to 60 bar (0 to 600 psi)
Range
Vacuum Pressure Range 0 to -0.95 bar
Hydraulic Pressure Range 0 to 700 bar (0 to 10,000 psi)
Maximum Safe Working 700 bar (10,000 psi)
Pressure
Pressure Connections ¼" BSP parallel female (¼" NPT
female in USA)
Maximum Hydraulic Fluid 150 cSt at 40°C (104°F)
Viscosity
Recommended Hydraulic De-mineralized water or mineral-
Fluids based oils (SAE 40W, ISO viscosity
grade 150)
Dimensions (Length x 260 mm (10.2") x 150 mm (5.3") x 100
Width x Depth) mm (3.7")
Weight (approximate) 1.2 kg (2.5 lb)
a. This value assumes atmospheric pressure at 1 bar (14.5 psi) and
varies depending on atmospheric pressure.
6. Returned Goods Procedure
If the unit requires calibration or is unserviceable, return it
to the nearest Druck Service Centre listed at: Druck.com
Contact the Service Department to obtain a Return
Authorization (Worldwide excluding USA).
In the USA, obtain a Return Material Authorization [RMA].
Provide the following information on either a RGA or RMA:
• Product (i.e. PV 411A)
• Pressure medium (i.e. pneumatic, hydraulic)
• Serial number
• Details of defect/work to be undertaken
• Operating conditions

6.1 Safety Precautions

INFORMATION
sources will affect the warranty and may not
guarantee further performance.
You must inform Druck if the product has been in contact
with any hazardous or toxic substance.
The relevant COSHH or in the USA, MSDS, references and
precautions to be taken when handling.
6.2 Approved Service Agents
For the list of service centers:
Druck.com
Hydraulic fluids must be
(0 to 28.5 inHg)
a a
Service by unauthorized
Copyright 2000 Baker Hughes Company.
English–PV 411A Instruction Manual | 5