Beginning Work With The Machine - diversey TASKI swingo 755B Manual Del Usuario

Beginning work with the machine

Attention:
Always wear slip-resistant shoes and ap-
propriate working clothes when working
with this machine!
Notice:
Whilst operating the machine always keep
both hands on the steering wheel / driving
handle, so that safe operation is guaran-
teed.
Attention:
Start familiarization with the machine by
making your first driving attempts in a free
area.
Attention:
If there is a danger of falling objects during
use of the machine, the necessary safety
precautions must be taken or adhered to in
accordance with national regulations.
Cleaning start
• Lower the squeegee.
• Switch the machine on.
The indicator elements lights up briefly.
• Lower the tool: see variant on page 88.
• Press the Suction unit ON/OFF but-
ton.
The display lights up; the suction en
gine starts.
• Press the Cleaning solution supply
ON/OFF button.
The display lights up.
The cleaning solution supply is start
ed when the brushes rotate.
• Select the desired dosing by press-
ing the +/- buttons from level 1-6.
Notice:
Diversey recommends a sustainable work-
ing by determination of the correct product
dosing quantity. Overdosing or underdos-
ing will lead to unsatisfactory cleaning re-
sults.
90
Notice:
TASKI offers an automatic dosage feature
as an option. It is possible to mount it addi-
tionally. Please contact your customer ser-
vice.
Power off function
Notice:
The machine turns itself off after 5 minutes
when no longer in use.
During these 5 minutes:
• the brushes may not be manipulated in any way.
• the user must not leave the machine out of sight.
• sucked in or jammed objects may be cleaned from the
squeegee only.
• the user is only allowed to leave the machine in order to
clear the work space. The user must maintain visual con-
tact.
Battery capacity - end of operational readiness
The battery level indicator provides information on the avail-
able operating time.
• If the red indicator begins to flash, approx. 5 minutes of
residual working time are left.
• After that the brush unit is lifted. The red display switches
to continuous light.
• Now 10 more minutes remain for driving the machine to the
charging station. Then the machine is automatically
switched off.
• In order to restart, the batteries must be fully charged.
Cleaning method
Direct working method:
Scrubbing and suction in one work step.
-
Indirect working method:
Applying the cleaning solution, scrubbing and suction in sev-
eral work steps.
Notice:
-
The machine guiding might be impaired in
case of special combinations of flooring/
contamination and cleaning product.
Optionally available wheels can improve
the traction of the machine on the floor.
Please contact your TASKI customer con-
sultant.
• By gently pushing the driving switch
into the direction of movement the
machine is set into motion.