Sony ZS-D7 Manual De Instrucciones página 28

Recording the CD tracks by specifying the tape length (continued)
Tip
If you made a mistake,
press CANCEL. The
track programed last
will be cleared.
Reprogram it.
Tip
To check the order of
the programed tracks:
Press ENTER after step
8 and turn the jog dial.
The track number will
be displayed in the
programed order.
28 EN
The Tape Player
5
Turn the jog dial (press the number buttons on the
remote) to select the track you want to program
and press ENTER.
Repeat this step.
6
Press ENTER.
The minimum tape length you need to record the
programed tracks flashes in the display.
7
To change the recording time, turn the jog dial and
input the time again.
If you do not change the recording time, skip to
step 8.
8
Press ENTER.
9
Insert a blank tape into the tape compartment.
10
Press DUB START CD m TAPE.
Recording will start on the front side automatically.
EDIT
EDIT
EDIT
REC EDIT