Symptom
The timer does not operate.
The remote does not function.
No sound from the portable MD
recorder connected to the MD
CONTROL jack of this player.
The player uses a built-in micro computer for its various operations. Due to change in power
supply conditions, etc., operation may sometimes become unstable. After trying the above
remedies, if the player still does not function properly, unplug the AC power cord and remove
all the batteries. After all indications in the display disappear, plug the power cord and insert the
batteries again. If the problem persists, please consult your nearest Sony dealer.
Remedy
• Make sure the time on the clock is correct.
• Replace all the batteries in the player
including the back-up batteries with new
ones if they are weak.
• Check to see if the AC power had been cut
off.
• Make sure the tape has not wound to the
end.
• Make sure the t (clock) indication is
displayed.
• Replace all the batteries in the remote with
new ones if they are weak.
• Make sure that you are pointing the remote
at the remote sensor on the player.
• Remove any obstacles in the path of the
remote and the player.
• Make sure the remote sensor is not exposed
to strong light such as direct sunlight or
fluorescent lamp light.
• Move closer to the player when using the
remote.
• If you have connected any component to
the LINE IN jack of this player, disconnect
the component.
Additional Information
53
EN