Applying The Mui Language - Dell PowerVault NX1950 Guia De Instalacion

Installation steps are not required as MUI is already installed on your system.
If you want to reinstall or restore MUI, perform the following steps:
1 Insert the Windows Unified Data Storage Server 2003 R2 x64 DVD
into the CD/DVD drive of the PowerVault NX1950 Storage system
and navigate to \cmpnents\mui\muisetup.exe.
NOTE:
There are separate MUI installers that you need to run for each
language. To ensure that all the MUI components have been installed,
see the readme file associated with the MUI pack.
2 In the Installer window, select the languages to be installed,
and select the default MUI language from the menu.
3 Click OK to perform the installation.
4 Reboot your system at the end of the installation.
5 After rebooting the system, open the readme file that contains details
about the language files and associations.
6 Run the second MUI installer for the required language.
7 Navigate to the location \cmpnents\mui\ and install the iscsi_target_sb
or iscsi_target_db depending on the required language.
8 Navigate to the location \cmpnents\mui\ and install the
WindowsServer2003-KB920697-x64-ENU.exe or WindowsServer2003-
KB922298-x64-ENU.exe depending on the required language.

Applying the MUI Language

You can perform the following steps to apply the MUI to a user:
NOTE:
Applying the MUI can also be done through the PowerVault NX1950
Initial Configuration Tasks Wizard.
1 Click Start→ Control Panel→ Regional and Language Options.
2 On the Regional Options tab, select the appropriate region under
Standards and Formats.
3 Update your Web browser default language and character encoding.
If you are using Windows Explorer, perform the following steps:
Open a browser window.
a
Select Tools→ Internet Options.
b
In the Internet Options window, click Languages.
c
26
Installation Guide
All manuals and user guides at all-guides.com