Connecting To A Cigarette Lighter Socket - Kenwood TH-D72A Manual De Instrucciones

CONNECTING TO A CIGARETTE LIGHTER SOCKET

To connect the transceiver to the cigarette lighter socket in your vehicle, use an
optional PG-3J Cigarette Lighter cable.
When the PG-3J is connected to the cigarette lighter plug, the transceiver
automatically starts charging the PB-45L battery pack. While you operate the
transceiver, it charges the PB-45L battery pack in the background.
To connect with an external 24 V power source via a DC-DC converter, only use the
optional PG-3J Cigarette Lighter cable.
Using the PG-2W DC cable in this situation may cause a fi re.
24V
24V
24V
Note:
◆ Do not use the PG-2W to connect directly to a vehicle battery (12 V). Extensive voltage could
result in damaging the transceiver.
◆ If the input voltage exceeds approximately 17.5 V, the transceiver automatically turns OFF.
6
DC-DC Converter
PG-3J
12V
Socket
12V
DC-DC Converter
12V
PG-3J
PG-2W