Kenwood TH-D72A Manual De Instrucciones página 4

THANK YOU
We are grateful you decided to purchase this KENWOOD FM transceiver.
KENWOOD always provides Amateur Radio products which surprise and excite
serious hobbyists. This transceiver is no exception. KENWOOD believes that this
product will satisfy your requirements for both voice and data communications.
The models listed below are covered by this manual.
TH-D72A: 144/440 MHz FM Dual Bander (The Americas)
TH-D72E: 144/430 MHz FM Dual Bander (Europe)
FEATURES
This transceiver has the following main features:
• A built-in GPS receiver unit.
• A built-in 5000 point GPS Logger.
• A built-in TNC which conforms to the AX.25 protocol. With a portable computer, it allows
you to easily enjoy Packet operation.
• Includes a program for dealing with data formats supported by Automatic Packet
Reporting System (APRS
• Contains a total of 1000 Memory channels to program frequencies and other various
data. Each Memory channel can be named using up to 8 alphanumeric characters.
• Continuous Tone Coded Squelch System (CTCSS) or Digital Coded Squelch (DCS)
rejects unwanted calls from other stations.
WRITING CONVENTIONS FOLLOWED IN THIS MANUAL
The writing conventions described below have been followed to simplify
instructions and avoid unnecessary repetition.
Instruction
Press [KEY].
Press [KEY] (1s).
Press [KEY1], [KEY2].
Press [F], [KEY].
Press [KEY] + Power ON.
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable
for countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be
disposed as household waste.
Old electrical and electronic equipment and batteries should be recycled at a facility
capable of handling these items and their waste byproducts. Contact your local
authority for details in locating a recycle facility nearest to you. Proper recycling and
waste disposal will help conserve resources whilst preventing detrimental effects on
our health and the environment.
®
).
Momentarily press KEY.
Press and hold KEY for 1 second or longer.
Press KEY1 momentarily, release KEY1, then press
KEY2.
Press the F key to enter Function mode, then press
KEY to access its secondary function.
With the transceiver power OFF, press and hold KEY
while turning the transceiver power ON.
Action