Kenwood TH-D72A Manual De Instrucciones página 23

Indicator Description
Appears when the Tone function is ON.
Appears when the CTCSS function is ON.
Appears when the DCS function is ON.
Appears when the Cross tone setting is "TONE/CTCSS".
Appears when the Cross tone setting is "DCS/CTCSS".
Appears when the Cross tone setting is "TONE/DCS".
Appears when the Cross tone setting is "DCS/Off".
Appears when Voice Alert is set to "On".
Appears when Voice Alert is set to "RX Only".
Appears when the Shift function is set to plus.
Appears when the Shift function is set to minus.
Appears when the Shift function is set to –7.6 MHz.
Appears when the Reverse function is ON.
Appears when the ASC function is ON.
Blinks when the ASC function is performing an OK check.
Appears while in Full Duplex mode.
Appears while in AM mode.
Appears while in Narrow FM mode.
Appears when the VOX function is ON.
Appears when the Key Lock function is ON.
Displays the operating frequency.
Appears while using the Internal data band.
Appears when the selected channel is not registered while in
Memory Input mode.
Appears when the selected channel is registered while in
Memory Input mode.
Displays the Memory channel number.
Appears when the Memory Channel Lockout function is ON.
Appears when Weather Alert is ON.
Blinks when receiving a signal. (TH-D72A only)
13