Backlight; Monitor - Kenwood TH-D72A Manual De Instrucciones

BACKLIGHT

Press [LAMP] to illuminate the display and keys.
• If no other key is pressed, the light turns OFF approximately 5 seconds after releasing
[LAMP].
• Press any key (including [PTT]) other than [LAMP] while the display and keys are lit to
restart the 5-second timer.
• Press [LAMP] while the display and keys are lit to immediately turn the light OFF.
Press [F], [LAMP] to keep the light ON continuously.
• The light remains ON until you press [F], [LAMP] again.
Note:
◆ You can set the Display lighting time in Menu No. 101.
◆ Press any key other than [LAMP] to change the lighting setting (Menu No. 102).

MONITOR

When you are receiving while the squelch function is ON, weak signals may
become intermittent.
If the CTCSS or DCS function is ON, you may want to disable the squelch
function temporarily to monitor the current channel activities.
1 Press and hold [MONI].
• The speaker is unmuted and you can monitor the signals.
2 Release [MONI] to return to normal operation.
21