Specifications - Kenwood TH-D72A Manual De Instrucciones

Band
A & B
Frequency
range
Band A
Band B
Mode
Antenna impedance
Operating temperature range
External power supply (DC IN)
Rated
voltage
Battery terminals
Ground method
Frequency stability
Receive with no
signals
Battery Saver ON (Single band)
TNC ON with no signals (Single band)
Current Transmit with H, 13.8 V (DC IN)
Transmit with H, 7.4 V (PB-45L)
Transmit with L, 7.4 V (PB-45L)
Transmit with EL, 7.4 V (PB-45L)
GPS only mode
Dimensions
1
(W x H x D)
2
Weight
1
With Battery pack (PB-45L)
2
Antenna, Battery pack (PB-45L) and Belt hook included.
Note:
◆ All specifi cations (General, Transmitter and Receiver) are guaranteed within the amateur radio
band.
◆ Specifi cations are subject to change without notice, due to advancements in technology.

SPECIFICATIONS

General
TX < VHF >
TH-D72A
TX < UHF >
TX < VHF >
TH-D72E
TX < UHF >
RX < VHF >
RX < UHF >
RX < VHF >
RX < UHF >
with PB-45L
Single band
Dual band
Projections not included
Projections included.
144 ~ 148 MHz
430 ~ 450 MHz
144 ~ 146 MHz
430 ~ 440 MHz
136 ~ 174 MHz
410 ~ 470 MHz
118 ~ 174 MHz
320 ~ 524 MHz
F1D/ F2D/ F3E
50 
–20°C ~ +60°C (–4°F ~ +140°F)
–10°C ~ +50°C (+14°F ~ +122°F)
DC 12.0 ~ 16.0 V (13.8 V nominal)
DC 5.5 ~ 9.0 V (7.4 V nominal)
Negative
Within ±5 ppm (–10°C ~ +50°C)
Approx. 100 mA
Approx. 150 mA
Approx. 30 mA
Approx. 135 mA
Approx. 1.6 A
Approx. 2.0 A
Approx. 800 mA
Approx. 500 mA
Approx. 60 mA
58 x 121.3 x 33.2 mm (2.28 x 4.78 x 1.31 in)
58 x 140 x 39.8 mm (2.28 x 5.51 x 1.57 in)
Approx. 370 g (13.1 oz)
41