Kenwood TH-D72A Manual De Instrucciones página 28

Memory Channel Mode
Memory Channel mode allows you to quickly select a frequently used frequency
and related data which you have stored in the memory channel.
1 Press [MR] to enter Memory Channel mode.
• The Memory channel number appears on the display.
2 Rotate the Tuning control to select your desired Memory channel.
• You can also select a Memory channel by using the [
Call Channel Mode
Call Channel mode allows you to quickly select a preset channel to allow
immediate calls on that frequency. The Call channel can be conveniently used as
an emergency channel within your group.
Note: The [CALL] key of the TH-D72E is set to transmit the "1750Hz" tone as default. When using
Call Channel mode, set Menu 162 [Repeater] – [CALL Key] to "Call".
1 Press [CALL] to enter Call Channel mode.
• "C" appears on the display.
• If the frequency of the operating band is less than 300 MHz, the VHF CALL channel
is used for recall. If the frequency is over 300 MHz, the UHF CALL channel is used
for recall.
2 Press [CALL] again, the transceiver will return to the previous status (VFO
mode or Memory Channel mode) before entering CALL mode.
18
]/[ ] keys.