Selecting The Preset Effect File; Adjusting The Sound Effects - Sony MHC-DP1000D Manual De Instrucciones

Selecting the preset
effect file
Press one of the DSP buttons (MUSIC
MODE, MOVIE MODE, GAME MODE, or
TOOL MODE) repeatedly to select the
preset effect you want.
The preset effect name appears in the display.
See "Sound effect options" below.
To cancel
Press EFFECT (or EFFECT ON/OFF on the
remote) to select "EFFECT OFF". All the
parameters become flat.
Sound effect options
You can enjoy surround sound simply by
selecting one of the preset effect according to
the program you want to listen to.
DSP Options
MODE
MUSIC LIVE HOUSE
MODE HALL
S.ENHANCE (SOUND ENHANCE)
RADIO SOUND
MOVIE C.STUDIO A (CINEMA STUDIO A)
MODE C.STUDIO B (CINEMA STUDIO B)
C.STUDIO C (CINEMA STUDIO C)
NORMAL SURR (NORMAL SURROUND)
GAME ARCADE
MODE RACING
ADVENTURE
BATTLE
TOOL PAN
MODE FLANGER
KEY CONTROL
EXCITER
COMPRESSOR
REVERB
EARLY RFLC. (EARLY REFLECTION)
CINEMA STUDIO A: Reproduces the sound
characteristics of Sony Pictures Entertainment's
classic editing studio.
CINEMA STUDIO B: Reproduces the sound
characteristics of Sony Pictures Entertainment's
mixing studio which is one of the most up-to-date
facilities in Hollywood.
CINEMA STUDIO C: Reproduces the sound
characteristics of Sony Pictures Entertainment's
BGM recording studio.
Adjusting the sound
effects
Before operation, first select the audio effect
you want for your basic sound.
1
Press DSP EDIT.
Each time you press the button, the display
changes as follows:
DSP EDIT* (to adjust DSP) y EQ EDIT
(to adjust equalizer)
* This menu does not appear depending on the
audio effect.
2
Use the digipad to adjust the
parameters.
The parameter is adjusted according to the
curve your finger slides on the digipad.
Adjustable parameters are described on
page 48. After the curve your finger slides
is displayed for a while, then the curve
automatically adjusted by the unit is
displayed. For DSP EDIT, the adjustable
parameters vary depending on the preset
effect.
3
Press ENTER.
To cancel
Press EFFECT (or EFFECT ON/OFF on the
remote) to select "EFFECT OFF". The
adjustment for the selected parameter is
canceled.
continued
GB
47