Hob Features - ELICA NikolaTesla Libra BL/F/83 Instrucciones De Uso

3.2.3 Hob features

• Safe Activation: The product is activated only in the presence of
pots on the cooking zone: the heating process does not start or is
interrupted if there are no pots, or if these are removed.
• Pot Detector: The product automatically detects the presence of
pots on the cooking zones.
• Safety Shut Down: For safety reasons, each cooking zone has a
maximum operating time, which depends on the maximum power
level set.
• Residual Heat Indicator: When switching off one or more cooking
zones, the residual heat is indicated with a specific visual signal on
the display of the corresponding zone by the " " symbol.
3.2.4 Operation
Note: activate the required zone first
• Switching on: Briefly touch
symbol will light up;
with a long press, all available functions will be visible for a few
moments, after which only the main ones will remain active; the
others may be used, and are activated subsequently during use
of the device.
Press ON/OFF (1) again to switch off.
• Selecting the cooking zones
Press (touch) briefly the Selection/Display (2) area corresponding to
the desired cooking area.
• Power Level
Touch and slide your fingers along the Selection bar (3):
to the right to increase the power level;
to the left to decrease the power level.
The power level set will be displayed in the Selection/Display
area (2)
There are 9 power levels available + an intensive power level
indicated on the display by the " " symbol (Power Booster).
The " " power level (Power Booster) remains active for 5 minutes,
after which the power returns to the previous level.
• Bridge Zones: The cooking zones FL ("Master") and RL
("Secondary") and the zones FR ("Master") and RR ("Secondary")
can work as a pair or in combined mode creating a single zone
thanks to the Bridge function (2 in total: 1 on the right and 1 on the
left) with the same power level. This function allows evenly
distributed cooking with large-sized pots and pans.
To activate the Bridge Function:
- select both cooking zones to be used simultaneously
- on the Display (2) of the "Secondary" cooking zone the " "
symbol appears
- using the Selection bar (3), it will be possible to set the
Operating power level, which will be shown in the Display (2) of
the "Master" cooking zone
- to disable the Bridge Function all you have to do is to repeat the
activation procedure
ON/OFF (1) hob/extractor: the
• Power Limitation
The Power Limitation function allows the product to be used while
limiting its maximum consumption.
Note : the setting must be carried out with the machine switched off,
without pressing the
is connected to the electrical system, or within 2 minutes of
reconnecting to the electrical system.
To set the Power Limitation:
- press
(which will flash, usually for the first 2 minutes after powering the
product on)
- continue to press and hold
time, of the Selection/Display (2) of the Cooking Zones in a
clockwise direction starting from the front right zone (FR)
- on each press a brief audible signal will sound
- once all of the Display (2) has been pressed, the
can be released:
- the Display (2) of the Right Left (RL) zone will display in an
alternating sequence "C" and "0", to indicate that the settings can be
carried out:
select the Display (2-RL)
then slide on the Selection Bar (3), until the display shows the
symbols "C" and "8",
on the Display (2-FL) the current setting will by shown
0 = 7.4 KW (default setting)
1 = 4.5 KW
2 = 3.1 KW
To change the Power Limitation setting
- press the Display (2) on the Front Left (FL) zone
- then slide on the Selection Bar (3) to make the new setting
- to save the selection made, press the
seconds; an extended audible signal will be emitted to confirm the
setting.
14
ON/OFF (1) button, at the moment the hob
, press all the areas, one at a
ON/OFF (1) button for 2
button