ELICA NikolaTesla Libra BL/F/83 Instrucciones De Uso página 16

NOTE = you may proceed by removing the weight from the scale
and use it in all its functions
NOTE = repeat a new long pressure to store a new weight; only the
last weight saved will remain in the memory.
By pressing "HOLD" (17) at any time you can view the value stored,
it appears and flashes for a few seconds in the display (23); within
this time by pressing "HOLD" (17) again the stored weight is
added to the weight on the scales; the display (23) displays the
total value and the bright feedback "HOLD" (23) remains alight, to
inform that the function is still active.
By pressing "HOLD" (17) again the weight stored is subtracted
from the weight shown in the display; the display (23) displays the
value of the difference and it exits automatically from the
function.
Example:
- weight stored: 1KG
- weight on the scale when calling the function: 2KG
- weight "added", that appears in the display: 3KG (1KG+2KG)
- weight "subtracted" before exiting the function: 2KG (3KG - 1KG)+
LOCK function
The "LOCK" function (21) blocks use of the scale to stop it from
being activated when various objects are placed in the weighing
area.
To activate this function, hold "LOCK" (21) pressed until the scale
display turns off;
Do the same to deactivate the function: hold "LOCK" (21) pressed
until the scale display turns back on.
NB = after 30 minutes of the "LOCK" function being active, the scale
turns off and "LOCK" is deactivated.
3.3 Using the extractor system
• Switching on: Briefly touch
symbol lights up.
Touch again to switch off.
• Switching on the extractor:
Touch the Selection Zone (12) to activate the extractor
• Extraction speed (power):
The extractor is equipped with 3 levels of extraction speed (power)
Touch and slide your fingers along the Selection bar (3):
towards the right to increase or to the left to decrease the extraction
power.
The extraction power will be displayed in the Selection/Display
(12) area
• Power Booster
The product has 2 additional power levels (above level 3)
−
Power Booster 1 : timed for 15 min.
−
Power Booster 2 : timed for 5 min.
after which the power returns to the previously set level.
Touch and slide with the fingers along the Selection bar (3) (over
level 3) and activate the Power Booster 1
The Power Booster level 1 is indicated in the Selection / Display
area (12) with the number "4" flashing
Touch and slide with the fingers along the Selection bar (3) (over
level 3) and activate the Power Booster 2
The Power Booster level 2 is indicated in the Selection / Display
area (12) with the symbol" " flashing
16
ON/OFF (1) hob/extractor: the