ELICA NikolaTesla Libra BL/F/83 Instrucciones De Uso página 15

3.2.5 Use of the scale
Product - Keys - Display
15. Weighing area
16. Display /Commands
17. HOLD function
18. TARE function
19. ZERO function
20. UNIT function
21. LOCK function
22. Numeric display of the scale
23. Indicator of the function in use
Indicator of the unit of measurement
24.
in use
25. Scale indicator
The product is equipped with a scale for food incorporated
IMPORTANT:
when using the scale with pots or containers larger than Ø 20cm, it is
advisable to switch off the suction of the hood in order to avoid
affecting the measurement of the weight;
NOTE = The pot or container must always be centred on the
weighing area, avoiding to obstruct the suction area.
NOTE = the maximum load of the scale is 10KG; consider a
tolerance of +/-2g on the value of each individual weighing.
Operation
• Switch-on
To activate the scale tap the weighing area (16) or place the product
to be weighed on the area itself; the display (22) activates showing
a weight equal to zero or equal to the weight of the product
NOTE = if in the weighing area are already present products and
these are removed, the scale will activate showing the weight of the
product removed with a negative sign; vice versa, if you add other
products, the scale will activate showing only the weight of the last
product added
• Switching off
The scale switches off automatically:
- after 2 minutes, if there are no objects on the weighing area
- after 8 minutes, if there are objects on the weighing area
• UNIT function
The scale is set by default on the metric measurement system, in
grams; press "UNIT" (20) to change the unit of measurement; the
unit of measurement in use is displayed below the display of the
scale, in the display (24)
• ZERO function
The function 'ZERO' (19) allows to bring "to zero" the numeric
display of the scale, whether there are products in the weighing
area or not (15); NOTE = the indicator ZERO (23) goes off when
products are added or removed from the weighing area (and the
weight of the products will be shown);
• TARE function
The function "TARE" (18) allows to gradually weigh different foods
without having to remove them from the weighing area, and be able
to have both the weight of each single food that total weight
use:
- position the first product in the weighing area, the display (22)
displays the weight "1"
- press "TARE" (18), the weight in the display (22) is reset
- add another product in the weighing area, the display (22)
displays the weight "2"
- press again "TARE" (18) the display (22) displays the weight
"1" + the weight "2"
NOTE = it is possible to add products up to the maximum load of
the scale
NOTE = to exclude the weight of container from the total weight,
carry out initially the tare through the "ZERO" (19) function
NOTE= to exit from the function "TARE" press "ZERO" (19)
• HOLD function
The function "HOLD" (17) allows to store the weight that you are
viewing and then recall it to add it or subtract it from the new weight
on the scales; the weight will remain stored in memory until the
scale is switched off
Use:
- place the product in the weighing area
- keep pressed "HOLD" (17) until the weight in the display starts to
flash: the value has been stored
15