arjo Enterprise ENT-ACC40 Instrucciones De Uso página 3

EN
Model ENT-ACC40 is designed to support Oxylog® portable ventilation equipment. It can be
used on any Arjo Enterprise® 5000, 5000X, 8000, 8000X, 9000 and 9000X series beds.
WARNING
Refer to the bed instructions for use to confirm compatibility before using this accessory.
Do not exceed the bracket's safe working load of 20kg
If a serious incident occurs in relation to this medical device, affecting the user, or the
patient then the user or patient should report the serious incident to the medical device
manufacturer or the distributor. In the European Union, the user should also report the
serious incident to the Competent Authority in the member state where they are located.
Installation
Fit the hooks (A) over the head end panel top rail (B), with the bracket inboard of the panel.
Rotate the bracket 360 so that it lies on the outside of the panel as illustrated.
A
B