Tabla de contenido
Publicidad
Do not install a lifting pole in the oxygen cylinder holder accessory
socket (4), as indicated by this label
The holder must only be used to support an oxygen cylinder of the
appropriate size.
Model ENT-ACC18 is NOT compatible with these accessories: ENT-ACC29 integral IV pole;
ENT-ACC57 base buffer.
Cleaning
For decontamination instructions, refer to the bed instructions for use.
Product weight
ENT-ACC08 = 2.2kg
ENT-ACC18 = 2.6kg
ENT-ACC58 = 2.8kg
End of Life Disposal
Components that are primarily be made up of different kinds of metal (containing more than 90%
metal by weight) for example sling bars, rails, upright supports, etc., should be recycled as metals.
Symbol explanation
Indicates the product is a Medical Device according to EU Medical Device
Regulation 2017/745
CE marking indicating conformity with European Community harmonised
legislation
Mandatory to read the Instructions for Use
WARNING
EN
Publicidad
Tabla de contenido
