Speaker Settings - Sharp SD-AT100H Manual De Manejo

Speaker settings

[Back]
„ Speaker size setting
You can change the sizes of the front speakers, centre speaker, and surround speak-
ers, or turn on or off the centre speaker, surround speakers, or subwoofer.
z The speaker settings are not displayed on the TV screen.
1
Press the SET UP AMP button.
2
Within 10 seconds, press the or
press the ENT button.
3
4
Front speaker (Left, Right)
Centre speaker
Surround speaker (Left, Right)
Subwoofer
(*): indicates the default setting (recommended for the supplied speakers).
Caution:
z To set the speaker size, set the sound mode to "STANDARD". In the stereo or vir-
z F-SMALL and SW-NO cannot be combined. If the subwoofer is changed to SW-
button to select "SP SIZE", and
Within 10 seconds, press the or
select the desired speaker.
The indicators of selected speakers flash.
Within 10 seconds, press the or
z To set sizes of other speakers, repeat the operation from step 3.
z You can complete the setting operation by pressing the RETURN
twice.
Speaker type
F-LARGE
F-SMALL *
C-LARGE
C-SMALL *
C-NO
S-LARGE
S-SMALL *
S-NO
SW-YES *
SW-NO
tual mode, only the subwoofer can be set.
NO whilst the front speakers are set to F-SMALL, they are changed to F-LARGE.
When the front speakers are changed to F-SMALL whilst the subwoofer is set to
SW-NO, it is changed to SW-YES.
01/11/16 SD-AT100H(H)E5.fm
SD-AT100H
ENGLISH
button to
button to select their sizes.
button
Speaker size
Large diameter
Small diameter
Large diameter
Small diameter
OFF
Large diameter
Small diameter
OFF
ON
OFF
E-48