Sharp SD-AT100H Manual De Manejo página 275

Acoustic effect
Standard
The maximum of 5.1ch surround sound
is reproduced to provide three-dimen-
sional effect. This unit automatically
emits the 5.1ch sound according to the
recorded audio signal.
appears in the display
of the unit.
Dynamic sound
You can enjoy the normal surround with various scenes.
MOVIE: The bass level is increased for powerful sound effect.
MUSIC: You can enjoy lively sound by producing the articulate sound.
NIGHT: Soft but powerful sound is achieved even at low volumes.
Virtual
Although no sound is heard from the
surround speakers, you can still enjoy
the 2.1ch surround sound as if they ex-
ist.
It sounds as if speakers are also placed
in .
appears in the display
of the unit.
Stereo
You can enjoy the great acoustic ef-
fects of the front speakers and sub-
woofer.
The input signal is recognised automatically and the indicator lights up.
z This indicator is lit when the 2ch signals are entered to extend them to the 5.1ch
surround sound.
z Even the 2ch sound recorded with Dolby Digital or MPEG multichannel will be
extended to the 5.1ch.
Caution:
Dolby Digital and MPEG multichannel audio does not function if the audio output is
set to "D-PCM" or "PCM" (pages 20, 21).
Notes:
z You can switch the audio whilst playing the disc of multiple types (Dolby Digital,
DTS, etc.) (page 38).
z When the surround mode is set to normal, the sound of monaural signals is heard
only from the centre speaker.
z When the surround mode is set to virtual, the same monaural sound is reproduced
in the both of the right and left channels.
z The surround indicator is lit according to the input audio source.
1 Front Left Signal Indicator
2 Centre Signal Indicator
3 Front Right Signal Indicator
4 LFE indicator
5 Surround Left Signal Indicator
6 Surround Monaural Signal Indicator
7 Surround Right Signal Indicator
01/11/16 SD-AT100H(H)E5.fm
SD-AT100H
ENGLISH
2 3
1
4
6
5 7
E-46