To Stop Playback - Sharp SD-AT100H Manual De Manejo

Caution:
z Close the disc compartment when it is not in use. Otherwise, dust may accumulate
inside and cause malfunction to the unit.
z The unit is slightly heated when used for a long time. It does not mean the unit is
damaged.
z Be careful not to jam your fingers in the disc compartment cover.
Notes:
z A safety feature automatically sets the unit to the power stand-by mode if you set
the volume level too high whilst playing certain types of discs. If this happens,
lower the volume level and restart playback.
z Stop positions may be recorded on some discs. When you play such a disc, play-
back stops there.
z During an operation, " " may appear indicating that the operation is disabled by
the disc.
[Front]
„ To interrupt playback
Press the DVD/CD
To resume playback from the same point, press the DVD/CD

„ To stop playback

Press the DVD/CD
„ To play a video CD with P. B. C. (playback
1
[Back]
2
3
The operation may vary depending on the video CD. Refer to its manual for details.
To play without displaying the menu:
After pressing the DVD/CD
The P. B. C. function will be cancelled, and the normal playback
will begin.
button.
button.
control)
Press the DVD/CD button.
The menu screen appears.
Select the desired menu number using the direct
buttons (0 - 9).
Press the ENT button to start playback.
button, press the
01/11/16 SD-AT100H(H)E3.fm
SD-AT100H
ENGLISH
button again.
Display
button.
E-28