„ Setting the sleep timer
You can set the unit to the power stand-by mode at the specified time.
1
Whilst the disc is playing, press the TIMER
button.
2
Within 10 seconds, press the
or
select "SLEEP SET", and press the ENT but-
ton.
3
Press the
or
button to select set the time.
(Maximum: 2 hours - Minimum: 1 minute)
z 2 hours - 5 minutes
5-minute intervals
z 5 minutes - 1 minute
1-minute intervals
4
Press the ENT button.
The sleep timer indicator lights up and playback begins.
5
Your system will enter the power stand-by mode automatically af-
ter the preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes.
You cannot change the volume.
Caution:
This unit cannot set the sleep timer of other equipment.
When setting the sleep timer using the digital tuner, TV, or VCR, the connected
equipment should be set to sleep timer at the same time.
To confirm the remaining sleep time:
1
Whilst "SLEEP" is indicated, press the TIMER button.
2
Within 10 seconds, press the
z The remaining sleep time is displayed for about 10 seconds.
z You can change the remaining sleep time whilst it is displayed by pressing the ENT
button (steps 3 - 4).
button to
To cancel the sleep operation:
Sleep operation is cancelled by turning the power on whilst "SLEEP" is indicated. The
same operation can be performed in the following procedure without turning the
power on.
1 Press the TIMER button.
2 Within 10 seconds, press the
ENT button.
„ To use timer and sleep operation together
You can fall asleep and wake up to the same CD.
1
2
or
button to select "SLEEP".
Remaining sleep time
or
button to select "SLEEP OFF", and press the
Set the sleep timer (steps 1 - 4).
Sleep operation starts.
Set the timer playback.
(Setting the timer on page 58, steps 1 - 7)
Sleep timer setting
Timer playback setting
1 minute - 2 hours
1minute - 2hours
Sleep Operation will
automatically stop
01/11/16
SD-AT100H(H)E6.fm
SD-AT100H
ENGLISH
Timer playback start
Desired time
Finish time
E-60