Troubleshooting; Disassembly And Disposal; Maintenance; Technical Data - SICK W16 Serie Instrucciones De Uso

9

TROUBLESHOOTING

9 Troubleshooting
10

Disassembly and disposal

en
11

Maintenance

12

Technical data

Sensing range (with reflector P250F)
Light spot size / distance
Supply voltage U
B
Ripple
Current consumption
30 O P E R A T I N G I N S T R U C T I O N S | WLG16
The Troubleshooting table indicates measures to be taken if the sensor stops working.
LED/fault pattern
Green LED flashes
Switching outputs do not
behave in accordance with
table 4
The sensor must be disposed of according to the applicable country-specific regula‐
tions. Efforts should be made during the disposal process to recycle the constituent
materials (particularly precious metals).
NOTE
Disposal of batteries, electric and electronic devices
• According to international directives, batteries, accumulators and electrical or
electronic devices must not be disposed of in general waste.
• The owner is obliged by law to return this devices at the end of their life to the
respective public collection points.
•
WEEE: This symbol on the product, its package or in this document,
indicates that a product is subject to these regulations.
This SICK sensor is maintenance-free.
We do, however, recommend that the following activities are undertaken regularly:
• Clean the optical interfaces using a plastic cleaner, do not use acetone or methy‐
lated spirits.
• Check the fittings and plug connectors
No modifications may be made to devices.
Subject to change without notice. Specified product properties and technical data are
not written guarantees.
Cause
IO-Link communication
1. Change of the configuration
2. Short-circuit
WLG16P
0 m ... 5 m
1)
Ø 80 mm (5 m)
DC 10 ... 30 V
≤ 5 V
SS
≤ 30 mA
2)
< 50 mA 3)
Measures
None
1. Adjustment of the configura‐
tion
2. Check electrical connections
8020349.1DS6/2021-11-24 | SICK
Subject to change without notice