Sauder Palladia 411836 Instrucciones De Montaje página 22

17 17
These tabs must insert into the slots.
2.
Y
FF
3.
Flip the drawer over onto the left DRAWER SIDE (P).
Diagram 1. Insert the tabs on a DRAWER ACTUATOR (FF) into the slots in a DRAWER RIGHT (35GC). You may need to insert one
tab first, then the other.
Diagram 2. Visually check that the DRAWER ACTUATOR (FF) is seated in the DRAWER RIGHT (35GC).
Diagram 3. If the DRAWER ACTUATOR is not seated, use your hammer to gently tap the SLIDE until the tabs are properly seated in
the slots.
Now, fasten this DRAWER RIGHT (35GC) to the right SMALL RIGHT DRAWER SIDE (P). Use two GOLD 5/16" FLAT HEAD
SCREWS (XX).
Repeat steps 16 and 17 for the other drawers.
Page 22
Slot
1.
35GC
FF
Post
FF
Y
Seated
www.sauder.com/services
P
P
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
XX
411836