Sauder Palladia 411836 Instrucciones De Montaje página 24

19 19
QQ
P
Apply the WARNING LABEL (QQ) to the SMALL DRAWER SIDE (P). You should be able to read the label when the drawer is
open. When the drawer is closed, it will hide the label. Peel off the backing and apply the label as shown in the diagram.
NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.
We recommend using the SAFETY BRACKET (II) for added stability. Use a BLACK 9/16" LARGE HEAD SCREW (VV) into the
top of the unit and a BROWN 1-1/2" FLAT HEAD SCREW (RR) into a stud in your wall.
NOTE: Please read the back pages of the instruction booklet for important safety information.
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
Page 24
40 lbs.
20 lbs.
35 lbs.
35 lbs.
35 lbs.
www.sauder.com/services
BROWN 1-1/2" FLAT HEAD SCREW
(1 used in a stud in the wall)
II
BLACK 9/16" LARGE HEAD SCREW
(1 used into the top of your unit)
Serious or fatal crushing injuries can
occur from furniture tip-over. To help
prevent tip-over:
-Place heaviest items in the lowest drawers.
-Unless specifi cally designed to
accommodate, do not set TVs or other heavy
objects on top of this product.
-Never allow children to climb or hang on
drawers, doors, or shelves.
-Never open more than one drawer at a time.
-If equipped with a drawer interlock system,
do not defeat or remove it.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
RR
VV
WARNING
411836