Sauder Palladia 411836 Instrucciones De Montaje página 23

18 18
L
PP
UU
GOLD 1" MACHINE SCREW
(2 used for the SMALL DRAWER FRONTS)
H
PP
SILVER 1/2" MACHINE SCREW
(6 used for the LARGE DRAWER FRONTS)
Carefully stand your unit upright.
Fasten two KNOBS (PP) to the SMALL DRAWER FRONT (L). Use two GOLD 1" MACHINE SCREWS (UU).
Fasten six KNOBS (PP) to the LARGE DRAWER FRONTS (H). Use six SILVER 1/2" MACHINE SCREWS (WW).
To insert the drawer into your unit, tip the front of the drawer down and drop the rollers on the drawer behind the rollers on the unit.
Lift the front of the drawer up and slide it into the unit.
To make adjustments to the drawer, loosen the SCREWS in the DRAWER FRONT BRACKETS, make needed adjustments, and
tighten the SCREWS.
411836
WW
www.sauder.com/services
Place the roller on the SLIDE
behind the roller on the RAIL.
Page 23