Overview
The PWS-100 Maintenance Web Application is a system
management application for configuring settings and
displaying information for the PWS-100 via a web
browser. It allows you to perform operations, such as
viewing the current status of the PWS-100, configuring
system settings, and configuring the RAID of the installed
HDD.
Note
This document is intended for system administrators. The operations
described in this document should only be performed by a system
administrator.
8
Overview / Screen Display
Screen Display
To open the Maintenance Web Application, log into the
PWS-100 unit, start your web browser, and enter the
following in the address bar.
http://127.0.0.1/pws-100/maintenance/
The Maintenance Web Application consists of the
following pages.
• Diagnosis page
• Settings page
• Disk page
When you click the "?" mark at the bottom left of the
screen, a pop-up screen displaying version information for
the Maintenance Web Application will appear.
When you click the [License Information] button,
information regarding Maintenance Web Application user
licenses will appear.
Diagnosis Page
This page displays the system version, serial ID, and any
errors and warnings that occur.
Serial Number
Displays the system serial ID.
Operation Hours
Displays the cumulative running time of the system.
Version
Displays the version number of the system components.
• MB_CPLD: CPLD version of the MB board
• RAID_PKG: Package version of the RAID block
• RAID_SYS: RAID CPU version of the MB board
• RAID_FPGA: RAID FPGA version of the MB board
• RAID_CPLD: RAID CPLD version of the MB board
• HKP: Version of the maintenance application
Temperature
Displays the temperature of system components.
• CPU Core: Temperature of the CPU core
• MB-1204: Value of the temperature sensor on the
MB-1204 board
• IF-1257: Value of the temperature sensor on the IF-1257
board
• IF-1258: Value of the temperature sensor on the IF-1258
board
• IF-1259: Value of the temperature sensor on the IF-1259
board