6.2. NAVIGATION THROUGH OSD
MENU
6.2.1. Video Settings Menu
Use the controls in the Video Settings Menu to calibrate
each display input to achieve optimum picture quality.
Scheme
Press ◄ or ► to select an image quality preset
depending on the type of program material being
viewed:
Options: User, Vivid, Cinema, Game, Sport;
Default: User
Brightness
Increase or decrease the brightness of picture.
Press ◄ or ► to select the desired level, and then press
ENTER.
Range: 0~100; Default: 50
OSD (ON-SCREEN DISPLAY) CONTROLS
Contrast
Increase or decrease the contrast of picture.
Press ◄ or ► to select the desired level, and then
press ENTER.
Range: 0~100; Default: 50
Sharpness
Adjust the definition of picture.
Press ◄ or ► to select the desired level, and then
press ENTER.
Range: 0~8; Default: 6
Saturation
Adjust the brilliance and brightness.
Press ◄ or ► to select the desired level, and then
press ENTER.
Range: 0~100; Default: 50
Hue
Increase or decrease the green hue.
Press ◄ or ► to select the desired level, and then
press ENTER.
Range: 0~100; Default: 50
Backlight
Increase or decrease the intensity of the LCD
backlight.
Press ◄ or ► to select the desired level, and then
press ENTER.
Range: 0~100; Default: 80
Gamma
Select gamma curve
Options: Off, 2.2; Default: 2.2
Color Temperature
Select a color temperature, or select User to make
RGB adjustments.
Options: User, 5000K, 6500K, 7500K and 9300K;
Default: 9300K
HDMI RGB Range
Select an RGB range for the HDMI input.
Options: Auto, Full, Limited; Default: Auto
Aspect Ratio
Select the appropriate aspect ratio for the type of
program material being viewed.
Options: Full Screen, Pillarbox, Auto; Default: Full
Screen
Auto Scan
Press ◄ or ► to turn this feature on or off. When
set to On, Auto Scan causes the input select
function (using the SOURCE button on the remote
control unit or keypad ) to skip over unused inputs,
saving time.
STX-5810/STX-6510 – USER MANUAL – ENGLISH
15