Included Accessory; Installation; Environment State; Power Input - Legamaster STX-5810 Manual Del Usuario

3.2. INCLUDED ACCESSORY

Item
IR Remote Control (Batteries Included)
IR Extender
HDMI Cable
USB Type B to A
Power Cord
USB Stick (Touch driver + VCOM driver + user manual included)
HDMI to DVI Adapter
Bag with EasyFix cable clips
Legamaster Ergonomic stylus

4. INSTALLATION

4.1. ENVIRONMENT STATE

When operating the STX series display, ambient room
conditions should not exceed the following:

4.2. POWER INPUT

The power cord (shipped separately) is used to connect the display to an AC wall outlet. Plug the power cord
into the AC inlet on the side of the display. Locate the Main Power switch directly above the AC inlet and press
"-" to turn power on, and "O" to turn power off.
Status LED / Light
Sensor / IR Receiver
OSD
Keypad
"I" is power on
"O" is power off
PACKAGE CONTENTS / INSTALLATION
Main power –
Switch
AC In socket
• Operating temperature: 5˚C to 35˚C
(41˚F to 95˚F)
• Humidity: less than 85% RH (Max)
Status LED / Light
Sensor / IR Receiver
OSD
Keypad
"I" is power on
"O" is power off
STX-5810/STX-6510 – USER MANUAL – ENGLISH
Main power –
Switch
AC In socket
9