Service; Appliance-Specific Safety Instructions For Grinders; Original Accessories/Auxiliary Equipment; Before Use - Parkside PDS 290 B2 FR Traducción Del Manual De Instrucciones Original

5. Service

a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
Appliance-specific safety instructions
for grinders
WARNING!
► Dusts from materials such as leaded paint,
some types of wood and metal can be
harmful to your health.
► Contact with or inhalation of these dusts can
represent a health hazard for the person
operating the appliance and other people in
the vicinity.
► Wear safety goggles and a protective dust
mask!
Original accessories/auxiliary
equipment
■
Use only the additional equipment and acces-
sories specified in the operating instructions.
Using attachments or accessory tools other than
those recommended in the operating instruc-
tions can lead to a risk of injury.
PDS 290 B2

Before use

Selecting a sanding sheet

Removal and surface:
The material removal rate and surface quality are
determined by the grain strength of the sandpaper.
■ Please note that you need to use appropriate
sandpapers with different grains for working
different materials.
Materials:
Wood (sanding sheets included in the delivery),
paints*, stone*
*Depending on the sanding sheet

Changing sanding sheets

The appliance has a Velcro sheet that enables fast
and simple changing of the sanding sheets.
WARNING!
► Always remove the plug from the mains power
socket before carrying out any work on the
appliance.
Attachment:
♦ You can attach the sanding sheet
sanding plate using the Velcro.
Make sure that the holes on the sanding sheet
match up with the holes on the sanding plate
Removal:
♦ Lift the sanding sheet
off the sanding plate
NOTE
► Before fitting a new sanding sheet
any dust and dirt from the sanding plate
to the
on one side and pull it
to remove it (see fig. b).
, remove
.
GB │ IE │
15 ■
.