Installation Instructions; Construction; Location - Hoshizaki IM-130ANE-HC Manual De Instrucciones

Ocultar thumbs Ver también para IM-130ANE-HC:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
I. INSTALLATION INSTRUCTIONS

1. CONSTRUCTION

2. LOCATION

This icemaker is not intended for outdoor use.
The icemaker should not be located next to ovens, grills or other high heat producing equipment.
This appliance is not suitable for installation in an area where a water jet could be used.
In some high humidity environments, condensation may form inside the machine and drip onto the floor. Do not install where
the floor can be affected by water.
The location should provide a firm and level foundation for the icemaker.
Do not place anything on top of the icemaker or in front of the louver.
Normal operating ambient temperature should be within 1°C to 40°C. Water connection is cold water only. Operation of the
icemaker, for extended periods, outside of these normal temperature ranges may affect production capacity.
Allow the clearance specified below for proper air circulation and ease of maintenance and/or service should they be required.
Side View
(Air-cooled model)
Avoid prolonged exposure of the appliance to direct sunlight.
Top Panel
Front Cover
Bin Door
Storage Bin
Adjustable Legs
IMPORTANT
Top
30cm
Rear
Front
30cm
ICEMAKER
Power Cord
Louver, Air Filter
(Air-cooled Model)
Handle
WARNING
CAUTION
NOTICE
Side View
(Water-cooled model)
Front
3
ENGLISH
Top
15cm
Rear
15cm
ICEMAKER

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Im-240ane-hc

Tabla de contenido