Mounting The Base Unit On A Wall - Sony Caller ID SPP-A700 Manual De Instrucciones

Mounting the base unit on a wall

1
Hang-up
tab
About 6 inches (15 cm)
2
3
AC power
adaptor cord
4
Telephone
line cord
Wall
bracket
Tip
To remove the wall bracket, press the lower tabs.
Boss
5~7
1
Wall plate
2
AC outlet
1
Reverse the hang-up tab.
2
Bundle the telephone line cord
and put it in the wall bracket.
3
Plug the AC power adaptor to
the DC IN 9V jack, and hook the
cord.
4
Attach the wall bracket to the
base unit.
Align the ¢ marks of the wall
bracket with those of the base
unit.
5
Plug one end of the telephone
line cord to the LINE jack, and
the other end to the telephone
outlet.
6
Hook the base unit to the wall
plate.
7
Plug the AC power adaptor to
an AC outlet. Then fully extend
the antenna.
6
5
7
AC power adaptor
Telephone
line cord
Additional Information
41 EN