12.3 How to use: Aqua Clean
This cleaning procedure uses humidity to
remove remaining fat and food particles from
the oven.
Step 1
Pour water into the cavity embossment:
300 ml.
Step 2
Set the function:
12.4 How to remove and install: Door
The oven door has two glass panels. You can remove the oven door and the internal glass
panel to clean it. Read the whole "Removing and installing door" instruction before you remove
the glass panels.
CAUTION!
Do not use the oven without the glass panels.
Step 1
Open the door fully and hold both hinges.
Step 2
Lift and turn the levers fully on both hinges.
Step 3
Close the oven door halfway to the first
opening position. Then lift and pull forward
and remove the door from its seat.
Step 4
Put the door on a soft cloth on a stable sur‐
face.
Step 5
Hold the door trim (B) on the top edge of the
door at the two sides and push inwards to re‐
lease the clip seal.
.
Step 3
Set the temperature to 90 °C.
Step 4
Let the oven work for 30 min.
Step 5
Turn off the oven.
Step 6
Wait until the oven is cold. Dry the cavi‐
ty with a soft cloth.
ENGLISH
23