Playing Back Tapes; Playing Back A Tape - JVC UX-G1 Manual De Instrucciones

Ocultar thumbs Ver también para UX-G1:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Playing Back Tapes

For Tape operations, use buttons inside the front cover on the
unit.

Playing Back a Tape

You can play back type I tapes only.
On the unit ONLY:
1
Open the front cover.
2
Press &/) (stop/cassette holder open).
The cassette holder opens.
3
Put a cassette in with the exposed part of the
tape down.
15
4
Close the cassette holder gently.
5
Press TAPE.
The unit automatically turns on and the
source changes to the tape deck.
• You can select to the tape by pressing TAPE
on the remote control.
6
Press # (play).
The tape starts playing.
• When the end of the tape is reached, playing
stops.
To stop playing, press &/).
To stop playing for a moment, press * (pause).
To resume playing, press * again.
To fast forward or rewind the tape, press
⁄ or !.
• The tape stops at the end of the fast
forwarding or rewinding. To release the
locked button, press &/).
To remove the cassette, press &/) while
playback is stopped.
• DO NOT turn off the unit while playing back or
recording a tape. The cassette deck or tapes
may be damaged.
• The use of C-120 or longer tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch
rollers and the capstans.
• This unit is not compatible with type II and type
IV tapes.
TAPE

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ca-uxg1Sp-uxg1

Tabla de contenido