Microcombi Operation; Setting Microcombi; Memory; Saving Settings In The Memory - Siemens iQ700 HF25G5L2 Instrucciones De Uso

3. Set the cooking time using the rotary selector.
 
  
4. Press the start button.
Nx
The set cooking time counts down in the display.
The cooking time has elapsed
A signal sounds. 0:00 appears in the display. Press the stop
button and switch off the appliance with the
can stop the audible signal by pressing the

MicroCombi operation

This involves simultaneous operation of the grill and the
microwave. Using the microwave makes your dishes ready
more quickly, but they are still nicely browned.
You can select any microwave power setting.
Exception: 900 and 600 watt.

Setting MicroCombi

Example: microwave 360 W, 17 minutes and grill setting 2.
Ž
Press the button.
1.
Your appliance is ready for use.
Press the button for the microwave power setting you require.
2.
A suggested cooking time appears.
3. Set the cooking time using the rotary selector.
,
4. Press the button 3 times.
¢ Nx
The and symbols light up in the display.
5. Press the button start.
Operation begins. The cooking time starts counting down in the
display.
The cooking time has elapsed
A signal sounds. Combination mode has finished. You can stop
the audible signal by pressing the

Memory

The memory gives you the option to store your own settings
and call them up again at any time. You have two memories
j k
available: " " and " ". The memory is useful if you prepare
one dish particularly frequently.

Saving settings in the memory

Ž
Press the button.
1.
Your appliance is ready for use.
Press the button for the microwave power setting you require.
2.
The display above the power lights up and a suggested
cooking time is displayed.
Set the cooking time using the rotary selector.
3.
8
3 NJ 0
Ž
button. You
0
button.
0
button.
Changing the setting
You can change the grill setting at any time. Then press the
start button again.
Pausing
Press the STOP button or open the appliance door. Operation
is suspended. After closing, press the start button. Operation
will then continue.
Cancelling the setting
Press the stop button twice and switch off the appliance with
Ž
the button.
Note: If you open the appliance door during cooking, the fan
may continue to run.
Note: If you open the appliance door during cooking, the fan
may continue to run.
Changing the settings
You may change the grill setting or cooking time at any time.
Then press the start button to resume operation.
Cancelling operation
Press the stop button twice and use the
off the appliance.
Opening the appliance door during operation
Operation is suspended. After closing the door, press the start
button. Operation will then continue.
Pausing operation
Press the stop button to pause operation.
Press the start button to continue operation.
Notes
You can also set the grill setting first and then set the
■
microwave power and cooking time.
If you open the appliance door during cooking, the fan may
■
continue to run.
j
4. Press and hold the or
signal sounds.
The setting is saved and can be started at any time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
Notes
The programmes which have been set remain stored even if
■
there is a power cut.
You can also store settings for the grill, MicroCombi mode
■
and the series of operations.
Ž
button to switch
k
button for a few seconds until a