Connecting The Device - Apex GM320T SD TENS Manual De Usuario

English

CONNECTING THE DEVICE

1. Prepare the Skin
Prepare.the.skin.as.previously.discussed.and.according.to.instructions.provided.with.your.electrodes..
Before.attaching.the.electrodes,.identify.the.area.in.which.your.physician/practitioner.has.recommend-
ed.for.electrode.placement.
2. Connect lead wires to the electrodes
Connect.the.lead.wires.to.the.electrodes.before.applying.the.electrodes.to.the.skin.
Note: Be sure both intensity controls for Channel 1 and 2 are turned to the "OFF" position.
3. Place Electrodes on Skin
Place.the.electrodes.on.the.skin.as.recommended.by.your.clinician.
4. Insert Lead Wire Connector to device
Plug.end.of.lead.wire.into.the.channel.output.receptacle.to.be.used,.pushing.plug.in.as.far.as.it.will.go.
5. Select Treatment Settings
Check.and.be.sure.your.unit.is.set.to.the.proper.settings.as.recommended.by.your.physician/practi-
tioner.
12
DIGI STIM_3 languages .indd 12 2013/2/23 AM 09:12:15