Apex GM320T SD TENS Manual De Usuario página 22

English
Declaration – electromagnetic emissions and immunity –
for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING
The.ME.system.is.intended.for.use.in.the.electromagnetic.environment.����.below..
The.customer.or.the.user.of.the.ME.system.should.assure.that.it.is.used.in.such.an.environment.
Immunity.test IEC.60601.test.level
Conducted.RF
3.Vrms
IEC.61000-4-6
150.kHz.to.80.MHz
Radiated.RF
3.V/m
IEC.61000-4-3
80.MHz.to.2.5.GHz
The.ME.system.is.intended.for.use.in.the.electromagnetic.environment.����.below.
The.customer.or.the.user.of.the.ME.system.should.assure.that.it.is.used.in.such.an.environment.
Immunity.test IEC.60601.test.level
Electrostatic.
±6.kV.contact
discharge.(ESD)
±8.kV.air
IEC.61000-4-2
DIGI STIM_3 languages .indd 20
The ME declaration – electromagnetic immunity
Compliance.level
3V
3V/m.
Declaration – electromagnetic immunity
Compliance.level
±6.kV.contact
±8.kV.air
20
Electromagnetic.environment.-.guidance
Portable.and.mobile.RF.communications.
equipment.should.be.used.no.closer.to.any.
part.of.the.EQUIPMENT.or.SYSTEM.including.
cables,.than.the.recommended.separation.
distance.calculated.from.the.equation.applicable.
to.the.frequency.of.the.transmitter.
Interference.may.occur.in.the.vicinity.of.
equipment.marked.with.the.following.symbol.
Electromagnetic.environment.-.guidance
Floors.should.be.wood,.concrete.or.ceramic.tile..
If.��� .are.covered.with.synthetic.material,.the.
relative.humidity.should.be.at.least.30.%.
2013/2/23 AM 09:12:15