How Do I Get Started; Inserting The Batteries - Microlife BP3GR1-3P Manual De Instruccion

4. How do I get started?

4.1. Inserting the batteries

After unpacking your device, insert the
batteries. The battery compartment is
located on the bottom of the device.
a) Remove the battery cover.
b) Insert the batteries (4 x size AA 1.5 V),
observing the indicated polarity.
c) If a battery warning appears in the
display, the batteries are discharged
and must be replaced.
Attention!
• After the low battery indicator
appears, the device won't function
until the batteries have been replaced.
• Please use "AA" Long-Life or Alkaline
1.5 V batteries, and replace them all at
the same time.
• If the blood pressure monitor is not
used for long periods, remove the
batteries from the device.
• We do not recommend using recharge-
able batteries.
12
Low Battery Indicator