Technical Data; Dimensioned Drawing - Aventics ED02 Instrucciones De Servicio

AVENTICS | ED02 | R414002573–BAL–001–AF | English

14 Technical Data

General data
Dimensions
(width x height x depth)
Weight
Operating temperature range
Storage temperature range
Control
Version
Permissible medium
Max. particle size
Oil content of compressed air
The pressure dew point must be at least 15°C below the ambient and medium
temperatures and must not exceed 3°C.
The oil content of compressed air must remain constant during the life cycle.
O Use only the approved oils from AVENTICS.
Protection class according
to EN 60529:2000
Mounting orientation
Vibration resistance
Pneumatics
Flow 0 to 1 bar, 0 to 2 bar, 0 to 6 bar, 0 to 10 bar:
see characteristic curve
–1 to +1 bar: 70 std l/min
0 to –1 bar: 55 std l/min
Output pressure Supply pressure
At 0 to 1 bar Max. 3 bar
(0 to 14 psi) (43 psi)
At 0 to 2 bar Max. 7 bar
(0 to 29 psi) (101 psi)
At 0 to 6 bar Max. 8 bar
(0 to 87 psi) (116 psi)
At 0 to 10 bar Max. 12 bar
(0 to 145 psi) (174 psi)
At –1 to +1 bar Max. 1.5 bar
(–14 to 14 psi) (22 psi)
At 0 to –1 bar –
(0 to –14 psi)
Electronics
Supply voltage
Permissible harmonic content
Power consumption
Input current resistance
(set point)
Input voltage resistance
(set point)
Current output (actual value),
external working resistance
Voltage output (actual value),
external working resistance
30 mm x 60 mm x 76 mm
0.32 kg
0°C to 50°C
–20°C to 80°C
Analog
Poppet valve
Compressed air
50 μm (oil-free and oiled compressed air)
for pressure range 0 to –1 bar:
5 μm (oil-free compressed air)
3
0–1 mg/m
IP65
(only when assembled and with all plugs
assembled)
±α = 0 ... 90°, ±β = 0 ... 90°
9
In dry, grease-free, and dust-free
environments, other mounting orientations are
available on request.
If assembled with screws in the through holes
± 10 g
If assembled with mounting kits for mounting
plate or rail ± 1 g
8
Reproducibility
0.01 bar
(0.15 psi)
0.015 bar
(0.22 psi)
0.03 bar
(0.43 psi)
0.03 bar
(0.43 psi)
0.015 bar
(0.22 psi)
0.01 bar
(0.15 psi)
24 V DC (±20%)
Only use a power pack with safe isolation
for the power supply
5%
max. 300 mA
Supply voltage switched on: 100 W
Supply voltage switched off: > 3 MW
Supply voltage switched on: 1.02 MΩ
Supply voltage switched off: > 3 MW
< 500 Ω
> 1 kΩ
Standards and directives complied with
DIN EN ISO 4414
DIN EN 61010-1
DIN EN 61000-6-2
DIN EN 61000-6-4
15 Appendix
Accessories
Component
Angled socket M12, 5-pin, for connection on XPC
Connecting cable, 2.5 m, for ED02 pressure regulator
with integrated M12 socket for connection on XPC
Connecting cable, 5 m, for ED02 pressure regulator
with integrated M12 socket for connection on XPC
Kit for stacking assembly of 2 units
Kit for stacking assembly of 3 units
Kit for stacking assembly of 4 units
Mounting kit for mounting plate
Rail mounting kit TH35-7.5

Dimensioned drawing

See
9
Hysteresis
< 0.01 bar
(< 0.15 psi)
< 0.025 bar
(< 0.36 psi)
< 0.05 bar
<0.73 psi)
< 0.05 bar
(<0.73 psi)
0.025 bar
(0.36 psi)
< 0.01 bar
(< 0.15 psi)
"Pneumatic fluid power – General rules and safety
requirements for systems and their components"
"Safety requirements for electrical equipment for
measurement, control, and laboratory use – part 1:
general requirements"
"Electromagnetic compatibility"
(interference immunity in industrial areas)
"Electromagnetic compatibility"
(interference emission in industrial areas)
Material number
1824484029
R419800109
R419800110
R414002579
R414002580
R414002581
R414002582
R414002583
12