Aventics RMV04-8DI_M8 Instrucciones De Servicio página 121

AVENTICS | PROFIBUS DP | R499050016–BDL–001–AE
Fig. 16: Diagnosis window with configuration error
Here the PROFIBUS DP is displayed in the upper half of the
window, along with the programming device (address 0), the
bus master (address 1), and the fields for the slaves (bus slaves
with addresses 2 to 125).
In the example in Fig. 16, the bus slave with the address 2
reports an error and the address field 2 is highlighted in red.
5. Click on the bus slave.
The following diagnosis message appears in the text window:
"Busteilnehmer ist nicht erreichbar" (bus slave not available).
If you click a module using the right mouse button in the
bus slave window in WinDP, the module's configuration data
is displayed in the "Moduldaten anzeigen..." (display module
data) window.
Commissioning and Operation
121