General Instructions - Aventics RMV04-8DI_M8 Instrucciones De Servicio

80 AVENTICS | PROFIBUS DP | R499050016–BDL–001–AE
For Your Safety
2.5

General instructions

W
Observe the regulations for accident prevention and
environmental protection.
W
Observe the safety instructions and regulations of the
country in which the product is used or operated.
W
Only use AVENTICS products that are in perfect working
order.
W
Follow all the instructions on the product.
W
Persons who assemble, operate, disassemble, or maintain
AVENTICS products must not consume any alcohol, drugs,
or pharmaceuticals that may affect their ability to respond.
W
To avoid injuries due to unsuitable spare parts, only use
accessories and spare parts approved by the manufacturer.
W
Comply with the technical data and ambient conditions
listed in the product documentation.
W
If unsuitable products are installed or used in safetyrelevant
applications, this may result in unintended system
operating states that may lead to injuries and/or equipment
damage. Therefore, only use a product in safety-relevant
applications if such use is specifically stated and permitted
in the product documentation.
W
You may only commission the product if you have
determined that the end product (such as a machine or
system) in which the AVENTICS products are installed
meets the country-specific provisions, safety regulations,
and standards for the specific application.A 24 V power
pack supplies all components with electricity. The power
pack must be fitted with a safe isolation in accordance with
EN 60742, VDE 0551 classification. The corresponding
electrical circuits are thus SELV/PELV circuits in
accordance with DIN EN 60204-1.