Address Assignments - Aventics RMV04-8DI_M8 Instrucciones De Servicio

AVENTICS | PROFIBUS DP | R499050016–BDL–001–AE 123
Commissioning and Operation
Fig. 18: Diagnosis window with correct configuration

7.2.9 Address assignments

Valve terminal address To be able to activate specific valves, it is necessary to allocate
assignment the bits of a PLC output to the individual valve positions on the
valve terminal. Examples for this assignment are found in
Table 14 on page 106 and Table 15 on page 107.
Single solenoid valves only use solenoid 14.
Address assignment for The bit number corresponds to the M8 input numbers on the
input/output modules input modules.
Example: If the PLC address E2 is assigned to an 8x input
module, bit E2.2 reads input 2 of input module 2. Input 0
corresponds to bit 0.
The same applies to output modules.