Machine-Related Safety Instructions; Health Hazard By Dust - Festool RTS 400 REQ Manual De Instrucciones

Ocultar thumbs Ver también para RTS 400 REQ:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

controlled with the switch is dangerous and must
be repaired.
c. Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk
of starting the power tool accidentally.
d. Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
e. Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool's operation. If dam-
aged, have the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak-
ing into account the working conditions and the
work to be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
h. Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
5 SERVICE
a. Have your power tool serviced by a qualified re-
pair person using only identical replacement
parts. This will ensure that the safety of the pow-
er tool is maintained.
b. Only use original Festool parts for repair and
maintenance. The use of incompatible accesso-
ries or spare parts can result in electric shocks or
other injuries.

Machine-related safety instructions

– Dust that is harmful to your health may be pro-
duced as you work (e.g. paint products contain-
ing lead and some types of wood). Contact with
or inhalation of this dust may pose a risk for the
operating personnel or persons in the vicinity.
Observe the safety regulations that apply in your
country.
Wear a P2 respiratory mask to protect your
health. In enclosed spaces, ensure that
there is sufficient ventilation and connect an ex-
traction system.
Always wear protective goggles to protect
against sanding hazards.
– Clean work equipment soaked in oils, for exam-
ple sanding pad or polishing felt, with water and
allow to dry. Work equipment soaked in oil may
combust spontaneously.
– Attention: Risk of fire! Avoid overheating the
grinding material and the sander. Always empty
the dust container before taking a break. Swarf
in the filter bag or filter of the mobile dust ex-
tractor may self-ignite in unfavourable condi-
tions such as flying sparks when grinding metals.
Particular danger exists if the swarf is mixed with
paint, polyurethane residue or other chemical
materials and the grinding material is hot after
long periods of work.
– If the power tool is dropped or falls, check for
damage to the machine and sanding pad. Remove
the sanding pad for closer inspection. Have the
damaged parts repaired before use.Broken sand-
ing pads and damaged machines can cause inju-
ries and machine instability.
– Always use original Festool sanding pads.

Health hazard by dust

WARNING! Various dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known (to the State of California) to cause cancer,
birth defects or other reproductive harm. Some ex-
amples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically treated
lumber.
The risk from these exposures
varies, depending on how often
you do this type of work. To re-
duce your exposure to these
chemicals: work in a well ven-
tilated area, and work with ap-
proved safety equipment, such as dust masks that
are specially designed to filter out microscopic par-
ticles. Wash hands after handling.
WARNING
TO REDUCE THE RISK OF INJURY, USER MUST
READ INSTRUCTION MANUAL.
9

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Dts 400 req

Tabla de contenido