Accessories; Environment - Festool RTS 400 REQ Manual De Instrucciones

rupted automatically and the machine comes to a
standstill.
To ensure constant air circulation, always keep the
cooling air openings in the motor housing clean and
free of any obstruction.
Use only original Festool accessories and Festool
consumable material intended for this machine.
These components are designed specifically for
this machine. Using accessories and consumable
material from other suppliers will most likely affect
the quality of your results and limit warranty
claims. Machine wear or your own personal work-
load may increase depending on the application.
Protect yourself and your machine, and preserve
your warranty claims by always using original Fes-
tool accessories and Festool consumable material!
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festoolusa.com".
Systainer
Many Festool products are shipped in a unique sys-
tem container, called "Systainer". This provides
protection and storage for the tool and accessories.
The Systainers are stackable and can be inter-
locked together. They also can be interlocked atop
Festool CT dust extractors.
To open the Systainer
Turn the T-loc [7-1] to this position.
To lock the Systainer
Turn the T-loc [7-1] to this position.
To connect two Systainers
Place one Systainer on the top of the other (Fig. [7
A]).
Turn the T-loc [7-1] to one of this posi-
tions (Fig. [7 B]).
Do not dispose of the device as domestic waste!
Dispose of machines, accessories and packaging at
16
In the event of a slowdown in performance or in-
creased vibrations, blow and clean cooling air
openings.

Accessories

The Systainers are connected and locked.
 A new generation Systainer is connectable on
top of a previous generation Systainer by the
four latches of the previous Systainer.
A
B 7.1

Environment

an environmentally responsible recycling centre.
Observe the respective national regulations.
7