General Characteristics - Cembre B1300-UC Manual De Uso

1. GENERAL CHARACTERISTICS

Application range
Rated crimping force
Minimum crimping force
Minimum operating pressure
Dimensions (Ref. to Fig. 6)
Weight with battery
Motor
Operating temperature
Recommended oil
Operating speed
Safety
Rechargeable battery
Type
Weight
Battery charger
Input
Acoustic noise
(1)
L
pA
L
pCPeak
L
WA
Vibration
(2)
(1)
Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u
L = weighted continuous acoustic pressure level equivalent.
pA
L = maximum value of the weighted acoustic displacement pressure at the work place.
pCPeak
L = acoustic power level emitted by the machine.
WA
(2)
Directive 2006/42/EC, annexe 1, point 2.2.1.1
Weighted root mean square in frequency of the acceleration the upper limbs are exposed to for each biodynamic
reference axis. Tests carried out in compliance with the indications contained in EN ISO 5349-1/2 Standard, and under
operating conditions much more severe than those normally found.
7
B1300-UC
suitable for installing electrical compression connectors
for conductors up to 400 mm
Aluminium conductors up to 300 mm
kN (US sh. ton)
kN (US sh. ton)
bar (psi)
mm (inches)
kg (lbs)
V DC
°C (°F)
twin speed operation and automatic switching from
a rapid advancing speed of the ram to a slower, more
V / Ah / Wh
kg (lbs)
ASC55-
type
EU
V / Hz
W
dB (A)
dB (C)
dB (A)
m/s 2
B1300-UCE B1300-UCT
2
(800 MCM) and
132 (14.84)
125,2 (14.07)
692 (10037)
423 x 239 x 102,5 (16.6 x 9.4 x 4)
6,5 (14.3)
18
-15 to +50 (+5 to +122)
ENI ARNICA ISO 32 or equivalents
powerful crimping speed
maximum pressure valve
18 / 5.2 / 93.6
CB1852L (Li-Ion)
0,66 (1.45)
ASC30-36- ASC30-36-
UK AUS/NZ
220 - 240 / 50 - 60
85
66,9
86,9
74,9
0.398 max.
B1300-UCA
2
(600 MCM)
ASC30-36-
USA/CAN
115 / 60