Proper Use; Environmental Protection; Warranty - Kärcher BD 43/25 C Bp Manual De Instrucciones

Proper use

Use this appliance only as directed in
these operating instructions.
– The appliance may only be used for
the cleaning of hard surfaces that
are not sensitive to moisture and
polishing operations.
– The appliance is not suited for the
cleaning of frozen grounds (e.g. in
cold stores).
– The appliance may only be
equipped with original accessories
and spare parts.
– The appliance is not suited for the
use in potentially explosive environ-
ments.
– The machine should not be used to
suck in inflammable gases, undilut-
ed acids or solvents.
This includes petrol, thinning
agents or hot oil that can form an
explosive mixture when it comes in
contact with sucked air. Do not use
acetone, undiluted acids and sol-
vents as they are aggressive to-
wards the materials from which the
appliance is made.
– The machine has been approved
for use on surfaces with max. gradi-
ents as listed under "Technical
Specifications".
– This appliance is suited for the
commercial use, e.g. in hotels,
schools, hospitals, factories, shops,
offices, and rental companies.
– The appliance was designed for the
cleaning of floors inside or of cov-
ered surfaces.

Environmental protection

The packaging material can
be recycled. Please do not
throw the packaging material
into household waste; please
send it for recycling.
Old appliances contain valu-
able recyclable materials that
should be recycled properly.
Batteries, oil, and similar sub-
stances must not be released
into the environment. Please
dispose of your old applianc-
es using appropriate collec-
tion systems.
Information on ingredients (REACH)
The latest information on ingredients
can be found under:
www.kaercher.de/REACH

Warranty

The warranty terms published by our
competent sales company are applica-
ble in each country. We will repair po-
tential failures of your accessory within
the warranty period free of charge, pro-
vided that such failure is caused by
faulty material or defects in fabrication.
In the event of a warranty claim please
contact your dealer or the nearest au-
thorized Customer Service center.
Please submit the proof of purchase.
3
-
EN 5