Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Contents
GB
1
2
Safety Notes . . . . . . . . . . . . . . . . . . . . . . 18
3
Applications . . . . . . . . . . . . . . . . . . . . . . . 18
4
Setting the Unit into Operation . . . . . . . 18
4.1 Connections . . . . . . . . . . . . . . . . . . . . . . . 18
4.1.1 DMX output . . . . . . . . . . . . . . . . . . . . . . 18
4.1.2 Audio input . . . . . . . . . . . . . . . . . . . . . . 19
4.1.3 MIDI connections . . . . . . . . . . . . . . . . . . 19
4.1.4 USB connection . . . . . . . . . . . . . . . . . . . 19
4.1.5 Power supply . . . . . . . . . . . . . . . . . . . . . 19
4.2 Basic settings . . . . . . . . . . . . . . . . . . . . . . 19
4.2.1 Setting DMX channels . . . . . . . . . . . . . . 19
4.2.2 Assigning movement channels . . . . . . . 19
5
Operation . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.1 Direct control . . . . . . . . . . . . . . . . . . . . . . . 20
5.1.1 Copying adjustments . . . . . . . . . . . . . . . 21
5.2 Scenes . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5.2.1 Programming scenes . . . . . . . . . . . . . . 21
5.2.2 Calling up scenes . . . . . . . . . . . . . . . . . 21
5.2.3 Deleting scenes . . . . . . . . . . . . . . . . . . . 22
5.3 Programs (CHASE) . . . . . . . . . . . . . . . . . . 22
5.3.1 Creating / extending programs . . . . . . . . 22
5.3.2 Calling up programs . . . . . . . . . . . . . . . 22
5.3.3 Deleting / inserting program steps . . . . . 23
5.3.4 Deleting programs . . . . . . . . . . . . . . . . . 23
5.4 Movement patterns (MOVEMENT) . . . . . . 23
6
Additional Functions . . . . . . . . . . . . . . . 24
6.1 Blackout . . . . . . . . . . . . . . . . . . . . . . . . . . 24
(STAND ALONE) . . . . . . . . . . . . . . . . . . . . 24
USB storage device . . . . . . . . . . . . . . . . . 24
from a USB storage device . . . . . . . . . . . . 24
6.5 MIDI control . . . . . . . . . . . . . . . . . . . . . . . . 25
6.6 Resetting the unit . . . . . . . . . . . . . . . . . . . 25
7
Specifications . . . . . . . . . . . . . . . . . . . . . 25
7.1 MIDI control commands . . . . . . . . . . . . . . 26
16
All operating elements and connections de -
scribed can be found on page 2.
1
Operating Elements
and Connections
1 Buttons to select scenes, each with a LED indi-
cator
When setting up the channels for movement
control, use the appropriate buttons while keep-
ing the button MODE (20) pressed to select the
movement direction desired (
2 Indicators A - D to indicate the current level for
the channels or scenes
3 Button PAGE to switch between the levels
(A - D) for the channels or scenes
4 Sliders to adjust the values for the channels or
to fade in and fade out scenes
5 Button SCENE / FIXTURE (with status LED) to
select light effect units or scenes:
LED lights up: the number buttons (17) can be
used to select light effect units
LED flashes: the buttons (1) or the sliders (4)
can be used to call up or fade in scenes
6 Button MOVEMENT (with status LED) to call up
a movement pattern by means of the number
buttons (17)
7 Button CHASE (with status LED) to call up a
program (a sequence of steps the user has pro-
grammed) by means of the number buttons (17)
8 LEDs to indicate the current control type for
replaying programs (CHASE); use the button
next to the LEDs to switch between the control
modes
AUTO:
time-controlled replay, can be ad -
justed by means of the controls
FADE TIME (25), WAIT TIME (24) or
the button TAP (15)
MUSIC:
the replay is controlled by means of
an audio signal at the input AUDIO
(28) or by means of the internal
microphone
MANUAL: manual retrieval of the individual
program steps by means of the but-
tons
9 Status LEDs to indicate the assignment
(ASSIGN) and the reversal (REVERSE) of the
channels for movement control of a light effect
unit
10 Button PROGRAM / REC to save a program step;
to activate or deactivate the programming mode,
keep the button pressed for 3 s
chapter 4.2.2).
and
(13)
Publicidad
Capítulos
Tabla de contenido
